|
Model |
CL16 CNC |
CL14 CNC |
|
No. of Control Axis |
2 Axis |
2 Axis |
|
Swing Over Bed |
Ø410mm(16.4") |
Ø360mm(14.17") |
|
Distance between Centres |
890mm(35") |
890mm(35") |
|
Max. Working Length for 4 Way Tool Post |
750mm(29.52") |
750mm(29.52") |
|
Max. Working Length for Hyd. P8 Turret |
630mm(24.80") |
630mm(24.80") |
|
Max.Working Dia. of 4 Way Tool Post |
Ø220mm(8.66") |
Ø170mm(6.7") |
|
Max.Working Dia. of Hyd. P8 Turret |
Ø210mm(8.27") |
160mm(6.29") |
|
Width of Bed |
260mm(10.236") |
260mm(10.236") |
|
Spindle Nose,Inter Taper |
STD. D1-6,MT. No.6 OPT.A1-6,MT. No.6 |
STD. D1-6,MT. No.6 OPT.A1-6,MT. No.6 |
|
Spindle Bore |
STD. Ø52.5mm(2.066")OPT.Ø51mm(2") |
STD. Ø52.5mm(2.066") OPT. Ø51mm(2") |
|
Spindle Speed for Gear Steps |
L25-480R.P.M |
L25-480R.P.M |
|
Spindle Speed Range |
H481-3000R.P.M |
H481-3000R.P.M |
|
Cross Slide Travel X-axis STD. |
205mm(8.07") |
205mm(8.07") |
|
Longitudinal Travel Z-axis STD. |
815mm(32.08") |
815mm(32.08") |
|
AC Servo Motor (X-axis) |
0.75kw(1hp)/3.5N.m |
0.75kw(1hp)/3.5N.m |
|
AC Servo Motor (Z-axis) |
1.2kw(1.6hp)/7.0N.m |
1.2kw(1.6hp)/7.0N.m |
|
Dia. Of Ball Screw (X-axis) |
Ø20mm(0.787")P5 C5 |
Ø20mm(0.787")P5 C5 |
|
Dia. Of Ball Screw (Z-axis) |
Ø32mm(1.259")P10 C5 |
Ø32mm(1.259")P10 C5 |
|
Rapid Traverse Speed (X-axis) |
7.5m/min(295.3 ipm) |
7.5m/min(295.3 ipm) |
|
Rapid Traverse Speed (Z-axis) |
10m/min(393.7 ipm) |
10m/min(393.7 ipm) |
|
Turret Tool Station |
OPT.Elec H4 Turret=20mm or Hydraulic P8 Turret=20mmØ20mm(0.787") |
STD. Manual 4 Way Tool Post = 20mm |
|
Turret Size of External Turning Tool |
||
|
Turret Boring Bar Diameter |
||
|
Quill Diameter of Tailstock |
Ø58mm(2.283") |
Ø58mm(2.283") |
|
Quill Travel of Tailstock |
140mm(5.5") |
140mm(5.5") |
|
Taper of Centre of Tailstock |
MT.No.4 |
MT.No.4 |
|
Main Spindle Motor |
5.5kw(7.37hp)/7.5kw(10.1hp)(30 min,rated) |
5.5kw(7.37hp)/7.5kw(10.1hp)(30 min,rated) |
|
Hydraulic Oil Pump Motor |
OPT. 0.75kw(1hp) OPT. 1.5kw(2hp) |
OPT. 0.75kw(1hp) OPT. 1.5kw(2hp) |
|
Forced Lubrication for Headstock Motor |
1/4hp |
1/4hp |
|
Coolant Pump Motor |
1/6hp |
1/6hp |
|
Hydraulic Tank |
OPT. 40Litre(8.8 gal.) |
OPT. 40Litre(8.8 gal.) |
|
Coolant Tank |
50L(11gal) |
50L(11gal) |
|
Net Weight |
2150kg |
2100kg |
STANDARD ACCESSORIES
• Siemens/Fanuc Controller
• Pneumatic Type Auto Speed Change Device
• Full Enclosure with Sliding Doors
• 3 Jaw Chuck
• Hydraulic Chuck
• Tool Box
• Rotating Centre
• Levelling Pads
• Full Set Manuals
OPTIONAL ACCESSORIES
• 4 Jaw Chuck
• Hydraulic Chuck
• Hydraulic Tailstock Quill
• High Pressure Coolant Pump
• Electric Turret
• Chip Conveyor With Bucket Cart
• Bar Feeder– DH65 X 1.5 M
• Steady Rest / Follow Rest