GLOBAL ELECTROMECH (M) SDN BHD

LV Switchboard Cubicle (Electronic) (Model: GESB LV 2021)

Trinocular NZ-PK7-AN-ESD

GENERAL SPECIFICATIONS

  • Equipment supplied included all necessary accessories
  • Will Complete to make sure fully operated.

Construction The LV MSB is modular, contained, suitable for both front back access. The Switchboard Construction is fabricated.
Paint Work The mill stell plate is treated with the trust inhibiting primer, following by coatings of top-quality epoxy powder paint and oven bake to 200° to obtain good adhesive.
Technical Data The LV MSB is suitable for 400-415V, 3 phase, 4 wire and 50 Hz system. It is designed to with stand a fault level of 31 MVA.
Busbars Busbars are of hard drawn high conductivity copper with current density of 400A per sq. In colour coating identification for the busbar arr as below:
  • Red-for red phase
  • Yellow - for yellow phase
  • Blue - for blue phase
  • Black - for neutral
Supply Supply with 2 termination box c/w 5 X 400 Amp copper terminal (R,Y,B,N,&E) and 4 X 35mm2 armourd cable.
Connection Pin and plug wheater proff connector c/w installations on panel switchboard.

TECHNICAL SPECIFICATIONS

Input Rating
  • Input Rating 400 - 415 V, 3 phase
  • 1 no Air Circuit Breaker 400 Amp, 25kA
  • TPN, draw out type, manual spring charge, c/w Mechanical & Electrical Interlock.
Output
  • 2 X 32 A TPN Switch Fuse
  • 2 X 32 A TPN MCCB
  • 2 X 63 A Fuse Switch
1 X ditribution board c/w
  • 4 X 6 A MCB
  • 2 X 20 A MCB
  • 2 X 32 AMCB
  • 1 X 40 A Main Switch SPN;
  • 1 X 40 A RCCB DP(100 mA)
  • Spare Compartment
Instruments
  • 1 X Ammeter c/w selector switch 0-500 A
  • 1 X Voltmeter c/w selector switch 0-500 V
  • 1 X Power Factor Meter
  • 1 set X Indicating light
  • 1 X kWh meter 3 phase (induction type)
Protective Device 1 X Protective Device (OCR X EFR)(Electronic)
Capacitor Bank
  • 1 X Power Factor Regulator 5 step c/w built in CT'(current Transformer)
  • 1 X 200A MCCB - for Capasitor Bank busbar
  • 1 X 20A MCCB for 1 X 5KVAR Capasitor Bank
  • 2 X 30A MCCB for 2 X 10 KVAR Capacitor Bank
  • 2 X 45A MCCB for 2 X 15 KVAR Capacitor Bank