SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X and Y axis
- High precision ballscrews on Z axis (anchored at both ends)
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
SPECIFICATION
- 1,540 mm (Xtreme 15xx)
- 2,040 mm (Xtreme 20xx)
- 2,540 mm (Xtreme 25xx)
- 3,040 mm (Xtreme 30xx)
- 3,540 mm (Xtreme 35xx)
- 4,040 mm (Xtreme 40xx)
- 3,080 mm (Xtreme xx30)
- 4,080 mm (Xtreme xx40)
- 5,080 mm (Xtreme xx50)
- 6,080 mm (Xtreme xx60)
- 8,080 mm (Xtreme xx80)
- 10,080 mm (Xtreme xx100)
- 12,080 mm (Xtreme xx120) etc.
The available lengths starts at 3,080 mm and increases in 1,000 mm increments, e.g.