Electrically Heated, for Holding Aluminum
The bale-out furnaces of the TM product lines were developed especially for use at different pouring locations. The cylindrical, very stable furnace housing, the very high-quality insulation and the meandering heating elements are the special features of this furnace family. The furnaces are designed to be transported by forklift truck and come with a plugin connection to the control gear. With a forklift truck the furnace can be transported to the pre-melt furnace for filling. When additional switchgear and control boxes are used, the bale-out furnace can also be optionally used at different pouring locations.
- Tmax 1000 °C, ideal for holding of aluminum
- Cylindrical, highly stable furnace housing
- Damper slots under the furnace for safe forklift transportation of the furnace inside the foundry
- All-round heating provided by resistant meandering heating elements
- Switchgear and control box for plug-in connection
- Heating of furnaces up to 60 kW power rating controlled using long-lasting, noiseless solid-state-relays
- Insulation constructed in multiple layers with lightweight refractory bricks on the hot face
- Emergency outlet for safe discharge of the melt in case of a crucible break
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- No exhaust gas vent necessary
- Crucible in standard design not included
- Furnace chamber control with temperature measurement behind the crucible
- Over-temperature limiter in the furnace chamber to protect against over-temperature. The limit controller switches off the heating when the pre-set limit temperature setting has been reached and does not switch it on again until the temperature falls below the setting again.
- Defined application within the constraints of the operating instructions
Slots under the furnace for the forklift forks
SForklift entry with dampers
Meander heating elements
| Model | Tmax furnace | Tmax melt bath | Curcible | Capasity | Heating power | Consumption Holding Lid closed/open | Outer dimensions in mm | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| °C | °C | Ø | H | kg Al | kg Cu | kW | kWh/h¹ | W | D | H | |
| TM 80/10 | 1000 | 800 | BU 200 | 200 | - | 21 | 4/9 | 1000 | 1100 | 1150 | |
| TM 150/10 | 1000 | 800 | 875 | 600 | 350 | - | 36 | 5/10 | 1320 | 1440 | 1150 |
| TM 240/10 | 1000 | 800 | BU 600 | 600 | - | 42 | 7/15 | 1220 | 1340 | 1450 | |
| TM 310/10 | 1000 | 800 | 1170 | 580 | 770 | - | 42 | 8/17 | 1650 | 1730 | 1200 |