Double Feeder LV Main Switch Board
GESB-80-03-05
GESB-80-03-05
This LV Main Switchboard training system consists of the following:
- LV Main Switchboard MSB 1 (Non-essential)
- LV Main Switchboard MSB 2 (Non-essential)
- Coupler (Change-over)
LV Main Switchboard – MSB 1 (Non-essential)
- 1 x Air Circuit Breaker (ACB) 1000A TPN 415VAC, 50Hz 50KA, hand operated draw out with shunt trip coil and caster key.
- 1 x Microprocessor based combined over current and earth fault relay with digital display
- 1 x Voltmeter c/w selector switch
- 1 x Ammeter c/w selector switch
- 1 x Power Factor Meter
- 1 x Kilowatt Meter
- 1 x Frequency Meter
- 1 x Kilowatt Hour Meter
- 1 x Digital Power Meter
- Phase Indicating light (red, yellow, blue)
- Set of control fuse
- Set of bus bar 1000A TP&N
- Set of current transformer
- Heater c/w thermostat and switch (auto/manual regulator)
- Tools compartment
- Spare compartment
- Automatic Power F—, Correction Panel consisting of the following
- Output panel consisting of the following:
- 1x Digital Power Factor Regulator
- Capacitor Bank: 3 x 15KVAr, 3 x 10KVAr, 5 x 5KVAr
- 1x MCCB 200A TP
- Circuit Breaker 15A TP
- 3-phase indicator
- 6 x Indicating light
- 2 x MCCB 100A TPN 50KA c/w shut trip coil and earth leakage relay (ELR)
- 1 x MCCB 200A TPN 50KA c/w shunt trip coil and earth leakage relay (ELR)
- 2 x MCCB 200A TPN 50KA c/w shunt trip coil and earth leakage relay (ELR)
LV Main Switchboard - MSB 2 (Non-essential)
- 1 x Air Circuit Breaker (ACB) 1000A TPN 415VAC, 50Hz 50KA, hand operated draw out with shunt trip coil and caster key.
- 1 x Inverse Definite Minimum Time-lag (IDMT) over current relay (CDG31 or equivalent)
- 1 x Inverse Definite Minimum Time-lag (IDMT) over current relay (CDG11 or equivalent)
- 1 x Voltmeter c/w selector switch
- 1 x Ammeter c/w selector switch
- 1 x Power Factor Meter
- 1 x Kilowatt Meter
- 1 x Frequency Meter
- 1 x Kilowatt Hour Meter
- 1 x Digital Power Meter
- Phase Indicating light (red, yellow, blue)
- Set of control fuse
- Set of bus bar 1000A TP&N
- Set of current transformer
- Set of Heater c/w thermostat and switch (auto/manual regulator)
- Tools compartment
- Spare compartment
- Automatic Power Factor, Correction Panel consisting of the following
- 1x Digital Power Factor Regulator
- Capacitor Bank: 3 x 15KVAr, 3 x 10KVAr, 5 x 5KVAr
- 1x MCCB 200A TP
- 6 X Circuit Breaker 15A TP
- 3-phase indicator
- 6 x Indicating light
Coupler (Change-over)
1 x Air Circuit Breaker (ACB) 1000A TPN 415VAC 50Hz 50KA, hand operated draw out with shunt trip coil and caster key.
Overall Dimensions
Approximate: 5000W x 1000D x 2000H mm