犀利士台灣購買網站https://yescialis.com/,服用一片即可任意享受性福。需求大的ED患者,建議购买犀利士,網站地址https://www.cialislilly.com/比較合適,還可以選擇5mg低劑量,可以天天服用。
1 / 6
2 / 6
3 / 6
4 / 6
5 / 6
6 / 6
❮
❯
SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X axis
- High precision ballscrews on Y and Z axis (anchored at both ends), optional ballscrews on all axis
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
SPECIFICATION
- 1.580 x 1.540 mm (Model 1515)
- 3.080 x 1.540 mm (Model 1530)
- 4.080 x 1.540 mm (Model 1540)
- 5.080 x 1.540 mm (Model 1550)
- 6.080 x 1.540 mm (Model 1560)
- 3.080 x 2.040 mm (Model 2030)
- 4.080 x 2.040 mm (Model 2040)
- 5.080 x 2.040 mm (Model 2050)
- 6.080 x 2.040 mm (Model 2060)
- 3.080 x 2.540 mm (Model 2530)
- 4.080 x 2.540 mm (Model 2540)
- 5.080 x 2.540 mm (Model 2550)
- 6.080 x 2.540 mm (Model 2560)
- Custom table sizes are available on request
1 / 4
2 / 4
3 / 4
4 / 4
❮
❯
SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X axis
- High precision ballscrews on Y and Z axis (anchored at both ends), optional ballscrews on all axis
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
SPECIFICATION
- 1.580 x 1.540 mm (Model 1515)
- 3.080 x 1.540 mm (Model 1530)
- 4.080 x 1.540 mm (Model 1540)
- 5.080 x 1.540 mm (Model 1550)
- 6.080 x 1.540 mm (Model 1560)
- 3.080 x 2.040 mm (Model 2030)
- 4.080 x 2.040 mm (Model 2040)
- 5.080 x 2.040 mm (Model 2050)
- 6.080 x 2.040 mm (Model 2060)
- 3.080 x 2.540 mm (Model 2530)
- 4.080 x 2.540 mm (Model 2540)
- 5.080 x 2.540 mm (Model 2550)
- 6.080 x 2.540 mm (Model 2560)
- Custom table sizes are available on request
1 / 6
2 / 6
3 / 6
4 / 6
5 / 6
6 / 6
❮
❯
SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X and Y axis
- High precision ballscrews on Z axis (anchored at both ends)
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
WORKAREAS
- 1,540 mm (XXL 15xx)
- 2,040 mm (XXL 20xx)
- 2,540 mm (XXL 25xx)
- 3,040 mm (XXL 30xx)
- 3,540 mm (XXL 35xx)
- 4,040 mm (XXL 40xx)
The available lengths starts at 3,080 mm and increases in 1,000 mm increments, e.g.
- 3,080 mm (XXL xx30)
- 4,080 mm (XXL xx40)
- 5,080 mm (XXL xx50)
- 6,080 mm (XXL xx60)
- 8,080 mm (XXL xx80)
- 10,080 mm (XXL xx100)
- 12,080 mm (XXL xx120) etc.
SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X and Y axis
- High precision ballscrews on Z axis (anchored at both ends)
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
SPECIFICATION
- 1,540 mm (Xtreme 15xx)
- 2,040 mm (Xtreme 20xx)
- 2,540 mm (Xtreme 25xx)
- 3,040 mm (Xtreme 30xx)
- 3,540 mm (Xtreme 35xx)
- 4,040 mm (Xtreme 40xx)
The available lengths starts at 3,080 mm and increases in 1,000 mm increments, e.g.
- 3,080 mm (Xtreme xx30)
- 4,080 mm (Xtreme xx40)
- 5,080 mm (Xtreme xx50)
- 6,080 mm (Xtreme xx60)
- 8,080 mm (Xtreme xx80)
- 10,080 mm (Xtreme xx100)
- 12,080 mm (Xtreme xx120) etc.
1 / 9
2 / 9
3 / 9
4 / 9
5 / 9
6 / 9
7 / 9
8 / 9
9 / 9
❮
❯
SPECIFICATION
- Space-saving fixed table - moving gantry design for small machine footprint
- Single structure welded, stress relieved and machined all-steel baseframe, gantry and gantry feet
- Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
- Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
- Open machine bed for easy loading and unloading by forklift or overhead crane
- High preload profiled linear bearings with cover strips on all axis
- Brushless digital A/C servo drives and motors on all axis
- Dual side drive and synchronised X-axis; no twist under load like applicable to a single center-mounted ballscrew or cantilevered design
- Helical rack and pinion drive system on X and Y axis
- High precision ballscrews on Z axis (anchored at both ends)
- Low-backlash planetary gear boxes
- Fully closed cable carriers prevent the cables from damage by chips and fine dust
- High quality, shielded cables for energy chains are a guarantee of reliability
- Z-axis clearance 200 m, optional 280 mm or 400 mm
- Z-axis travel 280 mm, optional 480 mm
- Maximum axis speed 100 m/min (1,000 mm/s) depending on controller, motors and drives
- Network connection via Ethernet (optional Wireless)
- Remote Administration via Internet
WORKAREAS
- 1580 x 1540 mm (Model 1515)
- 2580 x 1540 mm (Model 1525)
- 3080 x 1540 mm (Model 1530)
- 4080 x 1540 mm (Model 1540)
- 5080 x 1540 mm (Model 1550)
- 6080 x 1540 mm (Model 1560)
- 8080 x 1540 mm (Model 1580)
- 10080 x 1540 mm (Model 15100)
- 1580 x 2040 mm (Model 2015)
- 3080 x 2040 mm (Model 2030)
- 4080 x 2040 mm (Model 2040)
- 5080 x 2040 mm (Model 2050)
- 6080 x 2040 mm (Model 2060)
- 8080 x 2040 mm (Model 2080)
- 10080 x 2040 mm (Model 20100)
- 3080 x 2540 mm (Model 2530)
- 4080 x 2540 mm (Model 2540)
- 5080 x 2540 mm (Model 2550)
- 6080 x 2540 mm (Model 2560)
- Custom table sizes are available on request