GLOBAL ELECTROMECH (M) SDN BHD

犀利士台灣購買網站https://yescialis.com/,服用一片即可任意享受性福。需求大的ED患者,建議购买犀利士,網站地址https://www.cialislilly.com/比較合適,還可以選擇5mg低劑量,可以天天服用。

Bale-Out Furnace TC

SiC-Rod-Heated, for Melting

Bale-Out Furnace TC
Bale-out furnace TC 80/14

Bale-out furnace TC
Heated on both sides by high performance SiC rods


Bale-out furnace TC
Swing lid with good sealing to collar plate to avoid heat loss over the crucible opening

The electrically heated tilting furnaces and bale-out furnaces of the TC product lines are characterized by a higher melting performance than achievable with wire heated melting furnaces. These furnaces are designed for permanent operation at working temperatures.

  • Tmax 1450 °C also suitable for bronze alloys, with a maximum melting of 1320 °C, depending on the crucible condition
  • Heating from two sides by generously dimensioned SiC rods, temperature uniformity
  • Simple exchange of individual heating elements
  • Heat operation by thyistors in phase-angle mode with performance control:
    The resistance of the SiC rods changes with temperature and age. Performance control ensures constant power of heating irrespective to the condition of the heating elements.
  • High melting performance with temperature uniformity
  • Insulation constructed in multiple layers with lightweight refractory bricks on the hot face
  • SiC-Crucible
  • Emergency outlet for safe draining of the melt in case of crucible breakage
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • No exhaust gas discharge needed
  • Over-temperature limiter in furnace chamber for protection against overheating. The limiter switches the heating off when the set limit temperature is reached, and only switches it back on after the temperature has fallen again
  • Furnace chamber control with temperature measurement behind the crucible

Model Tmax furnace Tmax melt bath Curcible Capasity Heating power Connected load Melting performance Outer dimensions in mm Weight in
°C °C kg Al kg Cu kW kW kg/h Al kg/h Cu W D H kg
TC 20/14 1450 1320 A 150 45 150 36 69 80¹ 120 1200 1250 930 830
TC 40/14 1450 1320 A 300 90 300 36 69 80¹ 120 1260 1250 1020 950
TC 80/14 1450 1320 BU 200 200 650 48 94 120¹ 180 1360 1350 1080 1050
TC 150/14 1450 1320 BU 300 300 1000 66 112 140¹ 220 1450 1320 1300 1300