• No.1 Supplier
  • MOF Registered Company
  • Leading Service Provider

GLOBAL ELECTROMECH (M) SDN BHD

犀利士台灣購買網站https://yescialis.com/，服用一片即可任意享受性福。需求大的ED患者，建議购买犀利士，網站地址https://www.cialislilly.com/比較合適，還可以選擇5mg低劑量，可以天天服用。

Bale-Out Furnaces T

Electrically Heated, for Melting and Holding



Bale-Out Furnaces T


Bale-out furnace T 110/11

Bale-Out Furnaces T

Bale-out furnace T 800/11

Due to their high-grade insulation and optimized connected loads the bale-out furnaces can be used both for melting and holding. They feature good melting performance together with outstanding temperature uniformity in the melt. The 1100 °C version can be used for melting aluminum, the 1200 °C version for brass as well. The 1300 °C version can also be used for melting bronze alloys. The bale-out furnaces are fitted with multi-layer insulation.

Bale-Out Furnaces T
Four side heating for excellent temperature uniformity


Bale-Out Furnaces T
Manual ladling from a bale-out furnace T 80/10

  • T../11 with Tmax of 1100 °C for aluminum or zinc, with a maximum melt bath temperature, depending on the condition of the crucible, of 950 °C
  • T ../12 with Tmax of 1200 °C also suitable for brass, with a maximum melt bath temperature, depending on the condition of the crucible, of 1050 °C
  • T ../13 with Tmax of 1300 °C, also suitable for bronze alloys, with a maximum melt bath temperature, depending on the condition of the crucible, of 1150 °C
  • Four-side heating using electric heating elements, freely radiating on support tubes
  • Simple replacement of individual heating elements. In case of crucible breakage, only the defective heating elements on each level need to be replaced
  • Heating of furnaces up to 60 kW power rating controlled using long-lasting, noiseless solid-state-relays
  • Heating of furnaces beyond 60 kW with contactors
  • High melting performance with temperature uniformity in the melt
  • Insulation constructed in multiple layers with lightweight refractory bricks on the hot face
  • Emergency outlet for safe draining of the melt in case of crucible breakage
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • No exhaust gas discharge needed
  • Integrated safety system which continues to operate the furnace at reduced power in case of malfunction in the bath thermocouple, in order to prevent the freezing of the melt
  • Over-temperature limiter in furnace chamber for protection against overheating. The limiter switches the heating off when the set limit temperature is reached, and only switches it back on after the temperature has fallen again
  • Furnace chamber control with temperature measurement behind the crucible, recommended for melting
  • Crucible not included in the standard version
  • Defined application within the constraints of the operating instructions


Additional equipment
  • Crucible of clay-graphite or SiC
  • Work platform
  • Collecting pan under the emergency outlet
  • Crucible breakage monitor with visual and audible signal (not for 1300 °C models
  • SMS-alarm message to one or more mobile phones, e.g. in case of crucible breakage


Bale-Out Furnaces T
Bale-out furnace T 80/13 for gunmetal in a sand foundry shop

Model Tmax furnace Tmax melt bath Curcible Capasity Heating power Melting performance Consumption Holding lid closed/open Outer dimensions in mm Weight in
°C °C kg Al kg Cu in kW kg/h Al kg/h Cu kWh/h W D H kg
T 10/11 1100 950 A 70 20 - 16 32¹ - 3/5¹ 860 860 790 400
T 20/11 1100 950 A 150 45 - 20 42¹ - 3/6¹ 940 940 790 460
T 40/11 1100 950 A 300 90 - 26 58¹ - 3/7¹ 1010 1010 880 580
T 80/11 1100 950 BU 200 200 - 50 126¹ - 4/9¹ 1110 1110 940 650
T 110/11 1100 950 BU 300 300 - 60 136¹ - 5/10¹ 1200 1200 1040 880
T 150/11 1100 950 BU 350 350 - 60 147¹ - 5/10¹ 1200 1200 1250 900
T 180/11 1100 950 BU 500 500 - 70 168¹ - 7/15¹ 1370 1370 1250 1080
T 240/11 1100 950 BU 600 600 - 80 180¹ - 7/15¹ 1370 1370 1350 1200
T 360/11 1100 950 BN 800 800 - 110 200¹ - 8/17¹ 1510 1510 1490 2000
T 400/11 1100 950 BN 900 900 - 110 200¹ - 10/20¹ 1510 1510 1590 2100
T 500/11 1100 950 BN 1200 1200 - 110 200¹ - 11/21¹ 1510 1510 1640 2450
T 600/11 1100 950 BU 1310 1300 - 110 200¹ - 13/23¹ 1615 1615 1730 2550
T 650/11 1100 950 BP 1000 1400 - 110 240¹ - 13/20¹ 1685 1685 1360 2400
T 700/11 1100 950 BU 1510 1500 - 140 240¹ - 13/23¹ 1615 1615 1850 2750
T 800/1 1100 950 BU 1800 1800 - 140 240¹ - 15/25¹ 1685 1685 1830 2800
T 10/12 1200 1050 A 70 20 70 16 32¹ 47 5/8 860 860 770 440
T 20/12 1200 1050 A 150 45 150 20 42¹ 63 5/10 940 940 770 520
T 40/12 1200 1050 A 300 90 300 26 58¹ 84 5/12 1010 1010 860 600
T 80/12 1200 1050 BU 200 200 650 50 126¹ 190 5/15 1110 1110 930 760
T 10/13 1300 1150 A 70 20 70 16 32¹ 47 5/8¹ 900 900 890 600
T 20/13 1300 1150 A 150 45 150 20 42¹ 63 5/10 980 980 890 640
T 40/13 1300 1150 A 300 90 300 26 58¹ 84 5/12 1050 1050 970 760
T 80/13 1300 1150 BU 200 200 650 50 126¹ 190 5/15 1150 1150 1030 960